What’s new in PSS®E Rev. 32?
At a glance
PSS®E from Siemens Power Technologies International (Siemens PTI) provides users with power flow, short circuit, dynamic simulation, contingency analysis, optimal power flow, linear network, reliability assessment , and small signal analysis. The program employs the latest computer technology and numerical algorithms to efficiently solve networks large and small. More than 800 different organizations worldwide are benefiting from using the program.
The PSS®E program package incorporates years of PTI experience and growth. The program is continuously being improved.
PSS®E-32 Features Overview
Version 32 includes a number of dramatic enhancements driven by customer requests, namely:
substation Reliability Assessment
N-1-1 contingency analysis prototype
streamlined documentation
PSS®DB database
enhanced integrated plotting program for dynamics simulation
improved result presentation for AC contingency calculation.
Substation Reliability Assessment (SRA)
SRA is particularly suitable for:
comparing substation/network configuration alternatives and impact on reliability
evaluating the sensitivity of substation performance to outage statistics / equipment rating / load level
users can now specify breakers and switches in PSS®E. In addition to the traditional bus-branch models, PSS®E can now represent bus-breaker models.
special branch ID’s and symbols are available for breakers and switches specification in the cases and one-line diagrams
complex substation configuration, such as ring bus, breaker-and-half, etc, can now be represented in detail
automatic contingency analysis allow single breaker outage evaluation.
N-1-1 Contingency Analysis
More stringent than N-1, but less so than N-2 (simultaneous loss of two elements), N-1-1 allows system adjustments prior to the second contingency. To comply with NERC reliability criteria, thermal or voltage violations following N-1-1 contingencies should not exist. The existing tripping and automatic corrective actions in PSS®E are now integrated into the N-1-1 contingency evaluation.
To help our users prepare for the compliance before the standards are finalized, Version 32 provides you with a prototype Python program to evaluate system reliability compliance against N-1-1 contingency, in addition to a set of sample files to help you better understand the setup process.
Streamlined documentation
PSS®E has over 6,000 pages of documentation to assist our users with their specific needs. From instructions on how to setup for a contingency analysis to how to model an SVC, PSS®E documentation has been providing assistance to users all over the world. To further help users navigate our documentation, interface dependent contents were separated into an LMI guide and GUI guide to support these two modes of operation.
Enhanced plotting program
How would you like completing a study including steady state, short circuit, dynamics, and plotting all within the same interface? In version 32, all these analysis components can be driven by Python in the single entry program point. Additionally, the plotting package has been expanded to include the most commonly used features such as time plot, X-Y plot, and arithmetic functions. Templates of frequently used stability plots are also provided.
PSS®DB database
A personal, open database (Microsoft® Access or SQL) that works with PSS®E save cases and raw data files is available. Use variants to streamline your process in:
option evaluation of network upgrade
assessment of various load levels in the planning horizons
additional tools, such as harmonics module and protection module, are also available.
Improved ACCC results presentation
Contingencies can be ranked according to several methodologies and examined at the post-contingency, post-tripping and post-corrective actions stages by using previous and next buttons. Results can be displayed on the Slider Diagram as numbers or as a contour, allowing easy identification of elements causing problems.
New dynamics models for version 32
Generic two-terminal DC line model – CDC7T
new IEEE 421.5 models – ST5B, UEL1, ST7B, PSS4B, DC3A, and PSS1A
generic wind models.
Post-transient power flow evaluation for WECC
WECC_Ptran_2PV_IPP.py is a program that will create post-transient power flow outage cases to be used for conducting transmission rating studies in the post-transient environment.
This program enables the user to control how a base case is adjusted for the outage modeled. This is accomplished through an input file created by the user. This program was created for studies in the WECC region but can be manipulated by the user to fit other criteria.
Program operation improvements
elimination of working files and automatic resizing of bus limits when larger networks are loaded
integrated command line and improved character default handling
full four-digit representation for Areas, Owners, and Zones
added support for international number formats to spreadsheets
contingency file enhancements
improved switched shunt modeling and status flags
integrated command line
property sheets for easy editing
european style Phase shifter
UCTE data support.